Product Description Allows mounting of Waste King brand food waste disposer to an existing Insinkerator brand sink flange. Installs in seconds and is great for customers who want a fast and easy installation solution. Includes a new ISE splash guard and the adapter ring.
You don't need this.September 7, 2010 HumPlucker Don't purchase this kit for your Waste King disposal. You will not need it. The disposal has everything you need. You will only need this if you want keep the existing mount that came with the disposal that you want to replace this with. Why would you want to do that? Get rid of the old mount along with the broken garbage disposal. This Waste King includes everything you need. Don't buy this. You will be sorry when you do then you find out that the shipping you have to pay to return it costs just as much as this kit.
Disposal Info Wrong - Item not needed for Install of DisposerAugust 22, 2010 MichelleinFynance(Southern California) 1 out of 1 found this review helpful
The information on the Waste King Disposal page was wrong - I did NOT need this item or the Dishwasher Connector. Now I'm out an additional $18.00 for no good reason.
Works great, but weak instructionsAugust 18, 2010 Johnny(Minneapolis, MN USA) When I first got this, I struggled for about 45 minutes to figure out how it worked. Like one of the one-star raters I couldn't figure out how to make it fit to the old 3-bolt flange without falling through.
The problem is the instructions: they are very detailed about fitting a rubber adapter to one end of the new hard plastic piece. But then they tell you to take the other rubber adapter and put it between the 3-bolt flange and the new plastic piece. What they DON't tell you is that you have to fit this other adapter over a small rib on the hard plastic piece - just like you had to do at the other end.
A simple inspection of the pieces does not make this obvious. But once you do it, the now-expanded rubber piece fits very snugly against the old 3-bolt flange.
It would also help if their instructions didn't look like they'd been printed with a 30-year-old copier that was low on toner.
Waste King, Top RatedJuly 22, 2010 Marie We didn't use these parts, but order them as a back up when we ordered the Waste King. Waste King products are worth ordering.
Waste King Adapter - Works as advertisedJune 20, 2010 Jason Brown(Indiana) Replaced an old Badger 1 with Waste King L2600, we have a white sink and wanted to keep our existing white disposal collar.
Adapter was quick and easy to use, mated up easily with the exiting Badger sink collar mount. This did lower the disposal outlet by about a 1/2 inch. I needed to replace my existing 1-1/2" dia. sink tail with a longer one. The rest of the sink plumbing had enough slack so simple loosen and adjustment was needed. Suggest you plan for the adapter to lower you existing drain outlet by 1/2" to 1", so pick up spare plumbing drain line parts in advance of starting the job just in case you installation dose not have enough slack to make up the difference.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
